Amprobe LAN Cable Tester LAN-1
Amprobe LAN-1 LAN Cable Tester
The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go / no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display theresults.
Features
- Test pin configuration for:
- 10/100 base -T cable
- 10 base-2 cable
- RJ45 modular cables
- AT&T 258A cable
- EIA / TIA 568A/568B cables
- Token Ring Cable
- Verify the cable wiring for continuity, opens, shorts or incorrect wiring
- Test installed cable on wall plate or the patch panels by using the Remote Termination module
- Perform Loopback Test or Remote Test
- Buzzer sound warning for error condition in cable
- Two sets of LED lights for Source and Test indication
- Maximum line length: > 300 meters
- Connector types: RJ45, BNC
| Model Name | Description |
| LAN-1 |
|
Specifications
| Display: | 18 LEDs: 9 Red and 9 Green, 9 LEDs on Remote module |
| Battery: | Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22 |
| Low Battery Indicator: | The LED indicator will not turn ON when BATT button is pushed |
| Operating Environment: |
0 to 40°C (32 to 104°F), 10 to 70% RH |
Amprobe LAN-1 LAN Cable Tester
The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go / no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display theresults.
Features
- Test pin configuration for:
- 10/100 base -T cable
- 10 base-2 cable
- RJ45 modular cables
- AT&T 258A cable
- EIA / TIA 568A/568B cables
- Token Ring Cable
- Verify the cable wiring for continuity, opens, shorts or incorrect wiring
- Test installed cable on wall plate or the patch panels by using the Remote Termination module
- Perform Loopback Test or Remote Test
- Buzzer sound warning for error condition in cable
- Two sets of LED lights for Source and Test indication
- Maximum line length: > 300 meters
- Connector types: RJ45, BNC
| Model Name | Description |
| LAN-1 |
|
Specifications
| Display: | 18 LEDs: 9 Red and 9 Green, 9 LEDs on Remote module |
| Battery: | Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22 |
| Low Battery Indicator: | The LED indicator will not turn ON when BATT button is pushed |
| Operating Environment: |
0 to 40°C (32 to 104°F), 10 to 70% RH |
NAVIGATION
